TM-9-2320-366-20-3
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-3 - Page 370 of 1396
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-2)
Materials/Parts
Ties, Cable, Plastic (Item 69, Appendix D)
Tools/Special Tools
Multimeter, Digital (Item 22, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Personnel Required
(2)
1.
WARNING
Read WARNING
on following page.
TEST OPTIONS
Voltage Test or
STE/ICE-R Test #89
YES
NO
TEST OPTIONS
REASON FOR QUESTION
Go to step 2 of this fault.
x5. NO POWER TO DRIVER VISUAL ENHANCEMENT (DVE)
Is 24 VDC present at terminal
lug TL3?
2-2296
Change 2
Contact supervisor, Driver Visual
Enhancement (DVE) troubleshooting
needs to be performed.
START
TM 9-2320-366-20-3
If 24 VDC is not present, go to
step 2 of this fault.
If 24 VDC
is present, perform Driver
Visual Enhancement (DVE)
troubleshooting.
POSSIBLE PROBLEMS
Circuit breaker CB6 is not
tripped.
Faulty circuit breaker CB6.
Faulty digitization rack power
supply.
Faulty Driver Visual
Enhancement (DVE) system.
Back to Top
