TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 729 of 1178

TM 9-2320-366-34-3

Change 2

16-500.1

(7)

Install preformed packing (6) on adapter (7).

(8)

Position adapter (7) on linear directional control

valve (3).

(9)

Tighten adapter (7) to 43-47 lb-ft (58-63 N•m).

(10) Install tee fitting (8) on adapter (7).

(11) Install two preformed packings (9) on 90-degree

fittings (10).

(12) Install two 90-degree fittings (10) on linear

directional control valve (3).

d. Installation.

(1)

Remove insulation on four wires (.1).

(2)

Position sleeving (.2) on four wires (.1)

(3)

Install splices (.3) between wires (.1)

(4)

Install sleeving (.2) on four wires (.1)

CAUTION

Removal of insulation from electrical wires

conductors shall be performed so that there

is no evidence of physical damage to

individual strands.

Failure to comply may

result in damage to equipment.

NOTE

Remove ¼” of insulation from wires.