TM-9-2320-366-34-3
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4
AUGUST 2005
CHANGE 2
TM-9-2320-366-34-3 - Page 897 of 1178
TM 9-2320-366-34-3
WARNING
Hoist cylinder weighs approximately 430
lbs (195 kgs).
Attach a suitable lifting
device prior to removal. Failure to comply
may result in injury to personnel or
damage to equipment.
NOTE
Steps (3) through (12) require the aid of an
assistant.
(3) Raise hoist cylinder (4) until holes in subframe assembly
(5) are above frame (6).
(4) Install wrecking bar through holes in subframe assembly
(5).
(5) Lower hoist cylinder (4) until weight of subframe
assembly (5) is supported by wrecking bar.
(6) Remove hydraulic hose (1) from hoist cylinder (4).
(7) Remove hydraulic hose (2) from hoist cylinder (4).
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to
comply
may
result
in
injury
to
personnel.
(8) Remove retaining ring (7) from pin (8).
(9) Remove pin (8) from hoist cylinder (4).
17-27
Back to Top
