TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 889 of 1178

TM 9-2320-366-34-3

Change 2

17-19

i.

Pressure Reducing Valve Adjustment.

(1)

Raise dump body to maintenance position (TM 9-

2320-366-10-1).

(2)

Position drain pan under four way relief valve (1).

(3)

Remove cap from tee fitting (2) on port B.

(4)

Install adapter (3) and test hose (4) on tee fitting

(2) at port B.

(5)

Connect pressure teat cable (5) to transducer (6)

and to STE/ICE.

(6)

Start engine (TM 9-2320-366-10-1).

(7)

Position PTO switch to ON (TM 9-2320-366-10-1).

(8)

Attach a temperature indicator sticker to hydraulic oil

hydraulic tank (7).

(9)

Increase engine RPM to 1250-1450 (TM 9-2320-

366-10-1).

WARNING

•

Wear appropriate eye protection when

performing pressure checks.

Failure to

comply may result in oil getting into eyes.

If oil contacts eyes, seek medical attention

immediately.

Failure to comply may result

in injury to personnel.

•

Prolonged contact with lubricating oil

(MIL-L-2104) may cause a skin rash.

Skin

and clothing that comes into contact with

lubricating oil should be thoroughly

washed immediately.

Areas in which

lubricating oil is used should be well

ventilated to keep fumes to a minimum.

Failure to comply may result in injury to

personnel.

•

Lubricating oil is slippery and can cause

falls.

Wipe up spilled oil with rags.

Failure to comply may result in injury to

personnel.