TM 9-2320-366-34-3
17-18
Change 2
17-3.
M1090/M1094 FOUR-WAY RELIEF VALVE REPLACEMENT/REPAIR (CONT)
(19) Lower engine speed to idle (TM 9-2320-366-10-1).
(20) Position PTO switch to OFF (TM 9-2320-366-10-1).
(21) Shut down engine (TM 9-2320-366-10-1).
(22) Disconnect pressure test cable (10) from pressure
transducer (9) and to STE/ICE.
(23) Remove 10,000-PSI transducer (9) from test hose
(3).
(24) Remove plug (8) from hose A (5).
(25) Remove cap (7) from tee fitting (6).
(26) Connect hose A (5 to tee fitting (6).
(27) Disconnect test hose (3) and adapter (2) from tee
fitting (4).
WARNING
•
Wear appropriate eye protection when
performing pressure checks.
Failure to
comply may result in oil getting into eyes.
If oil contacts eyes, seek medical attention
immediately.
Failure to comply may result
in injury to personnel.
•
Prolonged contact with lubricating oil
(MIL-L-2104) may cause a skin rash.
Skin
and clothing that comes into contact with
lubricating oil should be thoroughly
washed immediately.
Areas in which
lubricating oil is used should be well
ventilated to keep fumes to a minimum.
Failure to comply may result in injury to
personnel.
•
Lubricating oil is slippery and can cause
falls.
Wipe up spilled oil with rags.
Failure to comply may result in injury to
personnel.