TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 885 of 1178

TM 9-2320-366-34-3

Change 2

17-15

h. Relief Valve Adjustment.

(1)

Raise dump body to maintenance position (TM 9-

2320-366-10-1).

(2)

Position drain pan under four way relief valve (1).

(3)

Install adapter (2) and test hose (3) on tee fitting

(4).

(4)

Disconnect hose A (5) from tee fitting (6).

(5)

Install cap (7) on tee fitting.

(6)

Install plug (8) in hose A (5).

(7)

Install high pressure transducer (9) (0-10,000 psi

[0-68,965 kPa]) on test hose (3).

(8)

Connect pressure test cable (10) to pressure

transducer (9) and to STE/ICE.

WARNING

•

Wear appropriate eye protection when

performing pressure checks.

Failure to

comply may result in oil getting into eyes.

If oil contacts eyes, seek medical attention

immediately.

Failure to comply may result

in injury to personnel.

•

Prolonged contact with lubricating oil

(MIL-L-2104) may cause a skin rash.

Skin

and clothing that comes into contact with

lubricating oil should be thoroughly

washed immediately.

Areas in which

lubricating oil is used should be well

ventilated to keep fumes to a minimum.

Failure to comply may result in injury to

personnel.

•

Lubricating oil is slippery and can cause

falls.

Wipe up spilled oil with rags.

Failure

to comply may result in injury to

personnel.

NOTE

Route test hose between frame and exit under

vehicle.