TM-9-2320-386-24-1-1
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2
MAY 2001
TM-9-2320-386-24-1-1 - Page 358 of 1078
1
~
2
3
6
7
9
8
4
5
0085 00-2
TM 9-2320-386-24-1-1
0085 00
FAN ACTUATOR REPLACEMENT (Contd)
END OF WORK PACKAGE
REMOVAL
1.
Loosen nut (3) and remove fan actuator tube (2) with insert (5) and sleeve (4) from fitting (6) on
cylinder assembly (7).
2.
Remove locknut (9), washer (8), and cylinder assembly (7) from actuator hub (1). Discard
locknut (9).
INSTALLATION
1.
Install cylinder assembly (7) on actuator hub (1) with washer (8) and new locknut (9). Tighten
locknut (9) 84 lb-in (10 N
•
m).
2.
Install fan actuator tube (2) with insert (5) and sleeve (4) on fitting (6) and tighten nut (3).
3.
Start engine (TM 9-2320-386-10) and allow air pressure to build up to normal operating pressure.
Check for air leaks and road test vehicle.
Back to Top
