TM-9-2320-386-24-1-1
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2
MAY 2001
TM-9-2320-386-24-1-1 - Page 363 of 1078
2
3
4
5
6
7
8
~
1
~
~
0087 00-2
TM 9-2320-386-24-1-1
0087 00
ENGINE DRIVEBELT TENSIONER REPLACEMENT (Contd)
END OF WORK PACKAGE
REMOVAL
1.
Place breaker bar in square slot of drivebelt tensioner (6).
2.
Rotate drivebelt tensioner (6) away from fan drivebelt (3) and remove fan drivebelt (3) from
alternator (8).
3.
Release drivebelt tensioner (6).
4.
Remove screw (4), washer (5), and drivebelt tensioner (6) from engine (7).
INSTALLATION
CAUTION
Ensure locator pin on drivebelt tensioner is installed in locator
pin hole on drivebelt tensioner bracket.
1.
Install drivebelt tensioner (6) on engine (7) with washer (5) and screw (4).
NOTE
Ensure fan drivebelt is aligned on all pulleys.
2.
Install fan drivebelt (3) on alternator (8), fan pulley (1), and crankshaft pulley (2).
3.
Place breaker bar in square slot of drivebelt tensioner (6).
4.
Rotate drivebelt tensioner (6) away from fan drivebelt (3) and install fan drivebelt (3) over drivebelt
tensioner (6).
5.
Release drivebelt tensioner (6).
6.
Start engine (TM 9-2320-386-10) and check fan drivebelt alignment.
Back to Top
