TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1043 of 1616

TM 9-2320-440-13&P

0143-3

0143

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8.

Remove four screws (15) and washers (16) from outer beam (8) and extension cylinder (17).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

Mark plates before removal to ensure same plate is installed on same side of inner

beam. Each plate may be a different thickness. Failure to comply may result in

damage to equipment.

NOTE

A plate is installed on each side of inner beam. Both are removed the same way. Rear

plate shown.

9.

Remove four screws (18) and rear plate (19) from inner beam (20).

10. Repeat step (9) to remove front plate.

THAAD0096

THAAD0097