TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1048 of 1616

TM 9-2320-440-13&P

0143-8

0143

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

Do not scrape extension cylinder rod when removing extension cylinder from

outrigger weldment. Failure to comply may result in damage to equipment.

26. With Soldier A holding one end of extension cylinder (17) and Soldier B holding other end of extension

cylinder (17), remove extension cylinder (17) from outrigger weldment (23).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Two hoses remaining on the right and left sides of extension cylinder are removed the

same way. Left side shown.

27. Remove two hoses (37) and preformed packings (38) from tubes (31). Discard preformed packings.

28. Repeat step (27) to remove right side hoses and preformed packings. Discard preformed packings.

END OF TASK

THAAD0105

THAAD0103