TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1045 of 1616

TM 9-2320-440-13&P

0143-5

0143

CAUTION

Mark plates before removal to ensure same plate is installed on same side of inner

beam. Each plate may be a different thickness. Failure to comply may result in

damage to equipment.

NOTE

A plate is installed on each side of inner beam. Both are removed the same way. Rear

plate shown.

14. Remove four screws (21) and rear plate (22) from outrigger weldment (23).

15. Repeat step (14) to remove front plate.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

WARNING

Inner beam weighs 141 lbs (64 kg). Do not lift inner beam without the aid of Soldier

B and a suitable lifting device. Failure to comply may result in serious injury to

personnel.

16. Attach suitable lifting device to inner beam (20).

CAUTION

Do not scrape inner beam on extension cylinder rod when removing inner beam

from outrigger weldment. Failure to comply may result in damage to equipment.

17. Remove inner beam (20) from outrigger weldment (23).

18. Remove suitable lifting device from inner beam (20).

THAAD0104