TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1054 of 1616

TM 9-2320-440-13&P

0143-14

0143

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

18. Install outer beam (8) in inner beam (20).

19. Remove suitable lifting device from outer beam (8).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing. To avoid injury or death, keep away

from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

CAUTION

Ensure same plate is installed on same side of outer beam. Each plate may be a

different thickness. Failure to comply may result in damage to equipment.

NOTE

One plate is installed on each side of outer beam. Both plates are installed the same way.

Rear plate shown.

20. Apply adhesive to four screws (18).

21. Install rear plate (19) on inner beam (20) with four screws (18).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

THAAD0097