TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1049 of 1616

TM 9-2320-440-13&P

0143-9

0143

INSTALLATION

CAUTION

Do not scrape extension cylinder rod when installing extension cylinder in

outrigger weldment. Failure to comply may result in damage to equipment.

NOTE

Two hoses on the right and left sides of extension cylinder are installed the same way. Left

side shown.

1.

Lightly lubricate two preformed packings (38) with clean oil and install preformed packings (38) and hoses

(37) on tubes (31).

2.

Repeat step (1) to install preformed packings and hoses on right side of extension cylinder (17).

NOTE

Two tabs in middle of extension cylinder must fit in between tabs inside of outrigger

weldment.

3.

With Soldier A holding one end of extension cylinder (17) and Soldier B holding other end of extension

cylinder (17), install extension cylinder (17) in outrigger weldment (23).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Install two washers (36) and pins (35) on outrigger weldment (23).

5.

Install two safety pins (34) on pins (35).

THAAD0106