TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 421 of 1616

TM 9-2320-440-13&P

0040-19

0040

MRP LOCKS DO NOT ENGAGE (CONTINUED)

THAAD0679

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 28.

Disconnect THAAD compression harness left MRP present proximity switch connector.

Turn engine start switch ON

Check for 22 to 28 vdc between wire

1461 at left MRP present proximity switch connector, terminal A and a known good

ground.

If 22 to 28 vdc are not present, repair wire 1461 (TM 9-2320-325-14&P) or

replace THAAD compression frame harness (WP 0087).

Step 29.

Turn engine start switch OFF (

Check for continuity across wire

1435 from THAAD compression frame harness left MRP present proximity switch

connector, terminal C to a known good ground.

If there is no continuity, repair wire 1435 (TM 9-2320-325-14&P) or replace

THAAD compression frame harness (WP 0087).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10

)TM 9-2320-347-10)