TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 415 of 1616

TM 9-2320-440-13&P

0040-13

0040

MRP LOCKS DO NOT ENGAGE (CONTINUED)

THAAD0676

Step 19.

Disconnect THAAD compression harness right MRP present proximity switch

connector.

Turn engine start switch ON (

Check for 22 to 28 vdc

between wire 1461 at right MRP present proximity switch connector, terminal A and a

known good ground.

If 22 to 28 vdc are not present, repair wire 1461 (TM 9-2320-325-14&P) or

replace THAAD compression frame harness (WP 0087).

Step 20.

Turn engine start switch OFF (

Check for continuity across wire

1435 from THAAD compression frame harness right MRP present proximity switch

connector, terminal C to a known good ground.

If there is no continuity, repair wire 1435 (TM 9-2320-325-14&P) or replace

THAAD compression frame harness (WP 0087).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION