TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 408 of 1616

TM 9-2320-440-13&P

0040-6

0040

MRP LOCKS DO NOT ENGAGE (CONTINUED)

THAAD0623A

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

NOTE

•

Perform Step 9 if no vdc is present on wire 1976A at connector REC10, terminal 9 in

Step 7.

•

Perform Step 10 if no vdc is present on wire 1976B at connector REC10, terminal 9 in

Step 7.

Step 9.

Disconnect THAAD control valve harness VIM No. 1, 24 pin connector (WP 0089).

Check for continuity across wire 1976A from VIM No. 1, 24 pin connector, terminal 9 to

connector REC10, terminal 2.

a.

If there is continuity, replace VIM No. 1 (WP 0089).

b.

If there is no continuity, repair wire 1976A (TM 9-2320-325-14&P) or

replace THAAD control valve harness (WP 0088).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION