TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 414 of 1616

TM 9-2320-440-13&P

0040-12

0040

MRP LOCKS DO NOT ENGAGE (CONTINUED)

THAAD0654C

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

NOTE

MRP present proximity switches must be activated in Step 18.

If MRP rack is not loaded,

activate both MRP present proximity switches by placing metal objects over proximity

switches.

Step 18.

Check for 22 to 28 vdc between wire 1962 at THAAD control valve harness VIM No. 1,

40 pin connector, terminal 32 and a known good ground.

If 22 to 28 vdc are not present, go to Step 23.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION