TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 418 of 1616

TM 9-2320-440-13&P

0040-16

0040

MRP LOCKS DO NOT ENGAGE (CONTINUED)

THAAD0679

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 23.

Disconnect THAAD compression harness left or right MRP present proximity switch

connector.

Turn engine start switch ON (

Check for 22 to 28 vdc

between wire 1461 at MRP present proximity switch connector, terminal A and a known

good ground.

If 22 to 28 vdc are present, go to Step 26.

THAAD0680

Step 24.

Disconnect THAAD control valve harness, THAAD compression frame connector.

Turn

engine start switch ON (

Check for 22 to 28 vdc between wire

1461 at THAAD compression frame harness connector, terminal K and a known good

ground.

If 22 to 28 vdc are present, repair wire 1461 (TM 9-2320-325-14&P) or

replace THAAD compression frame harness (WP 0069).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)

TM 9-2320-347-10)