TM 9-2320-440-13&P
0040-23
0040
MRP LOCKS DO NOT ENGAGE (CONTINUED)
THAAD0429A
Step 33.
Check for continuity across wire 1958 from VIM No. 1, 40 pin connector, terminal 34 to
MRP palm button switch, terminal 3.
If there is continuity, replace MRP palm button switch (WP 0073).
Step 34.
Disconnect THAAD control valve harness and THAAD chassis harness twelve-terminal
connector. Check for continuity across wire 1958 from VIM No. 1, 40 pin connector,
terminal 34 to twelve-terminal connector, terminal 7.
a.
If there is continuity, repair THAAD chassis harness wire 1958
(TM 9-2320-325-14&P) or notify Supervisor.
b.
If there is no continuity, repair wire 1958 (TM 9-2320-325-14&P) or
replace THAAD control valve harness (WP 0088).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION