TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 432 of 1616

TM 9-2320-440-13&P

0041-4

0041

OUTRIGGER CONTROLS FAIL TO OPERATE (CONTINUED)

THAAD0620

WARNING

Keep hands and feet clear of outriggers during outrigger/stabilizer extension and

retraction.

Failure to comply may result in injury to personnel.

CAUTION

Fully extending or retracting hydraulic cylinders will put hydraulic system in relief.

This should be limited to 10 seconds.

Failure to comply may result in damage to

equipment.

Step 5.

Connect pressure gage to hose to test port TP6. Start engine (

Soldier A checks for 3,000 psi (20,684 kPa) at pressure test port T6, while Soldier B

attempts to operate outriggers (WP 0013). Shut off engine (

Disconnect pressure gage hose.

If 3,000 psi (20,684 kPa) is measured at test port TP6, replace outrigger

control valve (WP 0142).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION