TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 437 of 1616

TM 9-2320-440-13&P

0041-9

0041

OUTRIGGER CONTROLS FAIL TO OPERATE (CONTINUED)

THAAD0625

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 14.

Remove outrigger palm button cover (WP 0073). Check for continuity across wire 1975

between THAAD chassis harness twelve terminal connector, terminal 5 and outrigger

palm button switch, terminal 3.

If there is no continuity, replace THAAD chassis harness wire 1975

(TM 9-2320-325-14&P) or notify Supervisor.

Step 15.

Check for continuity across wire 1435 from outrigger palm button, terminal 4 to a known

good ground.

a.

If there is continuity, replace outrigger palm button switch (WP 0073).

b.

If there is no continuity, repair THAAD chassis harness wire 1435

(TM 9-2320-325-14&P) or notify Supervisor.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION