TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 436 of 1616

TM 9-2320-440-13&P

0041-8

0041

OUTRIGGER CONTROLS FAIL TO OPERATE (CONTINUED)

THAAD0624

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 12.

Disconnect THAAD control valve harness VIM No. 2, 40 pin connector (WP 0089).

Soldier A checks for continuity across wire 1975 from VIM No. 2, 40 pin connector,

terminal 37 to a known good ground, while Soldier B presses outrigger palm button

switch (WP 0013).

If there is continuity, go to Step 16.

Step 13.

Disconnect THAAD control valve harness twelve-terminal connector. Check for

continuity across wire 1975 between THAAD control valve harness twelve-terminal

connector, terminal 5 and VIM No. 2, 40 pin connector, terminal 37.

If there is continuity, repair wire 1975 (TM 9-2320-325-14&P) or replace

THAAD control valve harness (WP 0088).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION