TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 438 of 1616

TM 9-2320-440-13&P

0041-10

0041

END OF WORK PACKAGE

OUTRIGGER CONTROLS FAIL TO OPERATE (CONTINUED)

THAAD0623

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 16.

Check for continuity across THAAD control valve harness wire 1973A from VIM No. 1,

40 pin connector, terminal 8 to connector REC6, terminal 2.

If there is no continuity, repair wire 1973A (TM 9-2320-325-14&P) and go to

Step 17, or replace THAAD control valve harness (WP 0088) and go to Step

18.

Step 17.

Check for continuity across THAAD control valve harness wire 1973B from VIM No. 2,

40 pin connector, terminal 8 to connector REC6, terminal 3.

If there is no continuity, repair wire 1973B (TM 9-2320-325-14&P) or replace

THAAD control valve harness (WP 0088) and go to Step 18.

Step 18.

Connect all connectors and install diode REC7 and outrigger palm button switch cover

(WP 0073). Start engine (

Check if outriggers operate (WP 0013).

a.

If outriggers operate, problem corrected.

b.

If outriggers do not operate, replace VIM No.2 (WP 0089).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)