TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 430 of 1616

TM 9-2320-440-13&P

0041-2

0041

OUTRIGGER CONTROLS FAIL TO OPERATE (CONTINUED)

THAAD0634

Step 2.

Shut off engine (

Inspect hydraulic hoses 2752, 2753, 2754, and

2762, tubings, and fittings from MRP distribution manifold and control valve to outrigger

control valve for leaks, kinks, and damage (See WP 0119).

If hydraulic hoses, tubes, and/or fittings leak or are damaged, tighten loose

fittings or replace damaged tubes and hoses (WP 0119).

THAAD0619

NOTE

MRP elevation cylinders must be in their fully stowed position to operate outriggers.

Step 3.

Check if left and right elevation cylinders are in their stowed position.

a.

If MRP rack is loaded, start engine (

engage rack

locks (WP 0012) and stow left and right elevation cylinders (WP 0007).

b.

Disengage rack locks before operating outriggers.

c.

If MRP rack is not loaded, stow left and right elevation cylinders using

bypass procedure (WP 0139).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)

TM 9-2320-347-10)