TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 339 of 552
FIELD MAINTENANCE
REFLECTOR REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's
(WP
0115, Table 1, Item 1)
Materials/Parts
Two lockwashers
(WP
0103, Figure 22, Item 3)
REMOVAL
Remove two nuts (Figure 1, Item 5), lockwashers (Figure 1, Item 4), and screws (Figure 1, Item 3) and reflector
(Figure 1, Item 1) from cargo body (Figure 1, Item 2). Discard lockwashers (Figure 1, Item 4).
END OF TASK
INSTALLATION
NOTE
Reflector should be installed on cargo body with heads of screws on inside of cargo body.
Install reflector (Figure 1, Item 1) on cargo body (Figure 1, Item 2) with two screws (Figure 1, Item 3), new lockwashers
(Figure 1, Item 4), and nuts (Figure 1, Item 5).
1
2
3
4
5
M116_M101_4-117
Figure 1.
Reflector Replacement.
END OF TASK
END OF WORK PACKAGE
TM 9-2330-202-13&P
0071
0071-1/2 blank
Back to Top
