TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 337 of 552
FIELD MAINTENANCE
CANVAS COVER ASSEMBLY ROPE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's
Tools and Special Tools (cont.)
(WP
0115, Table 1, Item 1)
REMOVAL
Cut rope (Figure 1, Item 3) from canvas cover assembly (Figure 1, Item 1). Discard rope (Figure 1, Item 3).
END OF TASK
INSTALLATION
1.
Feed new rope (Figure 1, Item 3) through grommet (Figure 1, Item 2) and loop securely around grommet
(Figure 1, Item 2). Install clip (Figure 1, Item 4) on rope (Figure 1, Item 3) and crimp.
2.
Install end clip (Figure 1, Item 5) on end of rope (Figure 1, Item 3) and crimp.
1
2
3
4
5
M116_M101_4-116
Figure 1.
Rope Replacement.
END OF TASK
END OF WORK PACKAGE
TM 9-2330-202-13&P
0070
0070-1/2 blank
Back to Top
