TM 9-2330-227-14&P
Section II. ELECTRICAL SYSTEM
Page
Page
Connector Receptacle Repair,
110-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connector Receptacle Repair,
24-volt . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wall Receptacle Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wire Harness, 24-Volt,
Domelights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wire Harness, 24-Volt, Running
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wire Harness, 110-Volt, Branch
5-8
Circuit Breakers-to-Lamps and
Switches . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5-9
Wire Harness, 110-Volt,
5-23
Connector Receptacle-to-Main
Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
5-11
Wire Harness Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-31
5-13
WIRE HARNESS, 110-VOLT, BRANCH CIRCUIT BREAKERS-TO-LAMPS AND SWITCHES
This task covers:
a. Removal (page 5-3)
b. Installation (page 5-4)
INITIAL SETUP
Tools
Equipment Condition
Handle, ratchet, 3/8-inch drive
All 110-volt lamps removed
(two required)
(page 4-31).
Screwdriver, flat-tip, 3/16-inch
All 110-volt switches removed
Socket, 3/8-inch drive, 7/16-inch
(page 4-35).
(two required)
Insulation removed as required
Wrench, open-end, 7/16-inch
to remove harness (page 4-173).
Materials/Parts
Tape, electrical (item 21, appendix E)
Personnel Required
One
Contact with live 110-volt electric wires could result in serious injury or death. Make
sure power source is disconnected before performing maintenance on the electrical
system.
5-2