TM 9-2330-227-14&P
CONNECTOR RECEPTACLE REPAIR, 110-VOLT
This task covers:
Removal (page 5-8)
INITIAL SETUP
Tools
Personnel Required
Screwdriver, flat-tip, 3/16-inch
One
Equipment Condition
Connector receptacle removed (page 4-76).
ACTION
LOCATION
ITEM
REMARKS
REPAIR
1.
Connector
receptacle (1)
2.
3.
4.
Two screws (2)
Using 3/16-inch flat-tip screwdriver,
unscrew and take out.
Gasket (3) and
Take out, and separate.
insulator (4)
Gasket (3)
Put in.
and insulator (4)
Two screws (2)
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
5-8