TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 286 of 576

5-12

TM 9-2330-227-14&P

WIRE HARNESS, 24-VOLT, DOMELIGHTS - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

1.

20 clamps (1)

20 screws (2)

Using 7/16-inch socket, ratchet handle

and nuts (3)

with 3/8-inch drive, and 7/16-inch

open-end wrench or 3/16-inch flat-tip

screwdriver, unscrew and take off.

Screws may be slotted or hex head.

2.

Harness (4)

20 clamps (1)

Using 3/16-inch flat-tip screwdriver, pry

apart and take off.

3.

Ceiling

Harness (4)

Take off,

INSTALLATION

4 .

Harness (4)

Place in position, and hold in place

with tape.

5.

Harness (4)

20 clamps (1)

a. Position at screw holes.

at frame (5)

b. Put on.

6.

20 clamps (1)

20 screws (2)

Screw together, and tighten using 7/16-

and frame (5)

and nuts (3)

inch socket, ratchet handle, and 7/16-

inch open-end wrench or 3/16-inch