TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 292 of 576

5-18

TM 9-2330-227-14&P

WIRE HARNESS, 24 - VOLT, RUNNING LIGHTS - CONTINUED

ACTION

LOCATION

ITE

M

REMARKS

INSTALLATION

Crossmember (2)

and cross-

member (3)

Main harness (1)

Crossmembers

(2) and (3)

Main harness (1)

Lay out entire harness under semitrailer.

Harness branch (4)

a.

b.

c.

Feed piece of safety wire through both

crossmembers (2) and (3),

Connect safety wire to one of

connectors (5).

Pull connectors one by one through

both crossmembers (2) and (3) until

all of branch (4) has been pulled

through.

Harness branch (6)

Repeat step 35.

Main harness (1)

a. Route piece of safety wire through

both crossmembers (2) and (3).

b. Connect to harness (1).

c. Pull harness (1) through both cross-

members (2) and (3).

Four grommets (7)

Put on.

Four grommets (7)

Using 3/16-inch flat-tip screwdriver,

push in.

Harness branch (6)

Feed through.

Grommets (11), (12),

Put on.

and (13)

Grommets (11), (12),

Using 3/16-inch flat-tip screwdriver,

and (13)

push in.