TM-9-2330-227-14-P
SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1985
TM-9-2330-227-14-P - Page 293 of 576
TM 9-2330-227-14&P
WIRE HARNESS, 24- VOLT, RUNNING LIGHTS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
43.
Harness
Two clamps (14)
a. Position at marked mounting holes.
branch (6)
b. Put on harness.
44.
Two clamps (14)
Two screws (15)
Screw in, and tighten using number two
cross-tip screwdriver.
45.
Harness branch (4)
Repeat steps 40 thru 44.
46.
Right front
Harness branch (6)
Place in position.
corner (16)
47.
Harness
Four clamps (17)
Put on.
branch (6)
48.
Four clamps (17)
Four screws (18)
Screw in, and tighten using 3/8-inch
and nuts (19)
flat-tip screwdriver and 7/16-inch
box-end wrench.
49.
Left front
Harness branch (4)
Repeat steps 46 thru 48.
corner (20)
5-19
Back to Top
