TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 283 of 576

5-9

TM 9-2330-227-14&P

CONNECTOR RECEPTACLE REPAIR, 24-VOLT

This task covers:

Repair (page 5-9)

INITIAL SETUP

Tools

Materials/Parts - Continued

Pliers, diagonal cutting

Flux, rosin (item 8, appendix E)

Screwdriver, flat-tip, 3/16-inch

Solder, non-acid (item 17, appendix E)

Soldering iron, gun type

Stripper, wire, hand

Personnel Required

Materials/Parts

One

Alcohol, denatured (item 2,

Equipment Condition

appendix E)

Brush, acid swabbing (item 4,

24-voIt connector receptacle removed

appendix E)

(page 4-74).

ACTION

LOCATION

ITEM

REMARKS

REPAIR

NOT E

Tag wires to aid in installation (page 4-4). If circuit marker bands are missing or not

readable, replace (page 4-73).

1.

Shell (1)

Bushing retaining

Unscrew, and pull back.

nut (2)

2.

Bushing (3)

Shell (1)

Using 3/16-inch flat-tip screwdriver,

pry off.

3.

12 inserts (4)

a. Using pliers, pull forward out of

bushing (3).