TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 339 of 462

TM

9-2330-238-14

5-13.

LANDING

GEAR

LEG ASSEMBLY

REPAIR

(EARLY MODEL)

(Con’t).

9.

10.

11.

12.

13.

Start drive

shaft (11) in opening

on top of upper

leg assembly

(34) with end of drive shaft that contains

three

holes facing mounting

side

of leg assembly.

Install washer

(6) and bevel gear (35) over woodruff

key (36) on drive shaft (11), then slide drive shaft in place

in

upper

leg assembly

(34) and secure

with two new spring

pins

(12).

Install

intermediate

drive shaft (23) on drive shaft (11) with capscrew

(24) and new self-locking

nut (22).

Lubricate

bevel

gears

(7 and 35) in accordance

with Lubrication

Instructions

(Chapter

3, Section

I).

Position

new gasket

(3) and access

cover (2) in place

on top of upper leg assembly

(34) and install four screws

(1).

TA702081

5-37