TM-9-2330-247-14-P

CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)

MARCH 1992

TM-9-2330-247-14-P - Page 105 of 320

TM 9-2330-247-14&P

4-30. HANDBRAKE CABLE AND LEVER ASSEMBLY (Con’t)

ACTION

LOCATION

ITEM

REMARKS

14.

Backing plate (35)

Cable assembly (1)

15.

Two pins (29)

Spring (37)

16.

Two slotted

washers (26) and

four washers (27)

17.

Brakeshoe lever

(28) and link (30)

INSTALLATION

18.

Brakeshoe lever

(28) and link

(30)

19.

Four washers

(27) and two

slotted washers (26)

20.

21.

Backing plate

(35)

22.

Brakeshoe

lever (28)

Spring (37)

Cable end (36)

Cable end (36)

Pull through backing plate (35) and remove.

Using slip-joint pliers, pull off.

a. Using hammer and ¼ in. flat-tip screwdriver,

tap out slotted washers (26).

b. Pull off washers (27).

Pull off together, then separate.

a. Push together with opening on link (30) sliding

into pin on back of brakeshoe lever (28).

b. Place in position on two pins (29).

a. Put two washers (27) on each pin (29).

b. Slide slotted washers (26) on pins (29).

c. Tap the rest of the way on using hammer and

¼ in. flat-tip screwdriver.

Put on using slip-joint pliers.

Feed through hole in backing plate (35).

Hold spring (37) back and push cable end (36) into

slot on brakeshoe lever (28).

4-51