TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 125 of 320
TM 9-2330-247-14&P
4-36.
WHEEL CYLINDERS
This Task Covers:
a.
Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
l Brakeshoes removed (para 4-32).
l Rags (Item 11, Appendix E)
Tools/Test Equipment:
l Pan, drain
l Wrench, box-end, ~~ in.
l Wrench, box-end, ~ in.
l Wrench, box-end, 1~~ in.
l Wrench, open-end, adjustable,
l Wrench, open-end, box, 7~fj in.
s Wrench, open-end, box, % in.
12 in.
ACTION
LOCATION
ITEM
REMARKS
NOTE
Both sets of wheel cylinders are replaced In the same way. This procedure is for one set
of wheel cylinders; repeat for the other set.
REMOVAL
1.
Top fitting (7)
and top wheel
cylinder (20)
NOTE
Have drain pan ready to catch brake fluid spillage.
Fluid passage bolt
a. Place drain pan under.
(5), gasket (6),
b. Using l~G in. box-end wrench, unscrew and
and gasket (8)
take off.
4-71
Back to Top
