TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 119 of 320
TM 9-2330-247-14&P
4-33.
BACKING PLATE (Con’t)
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
5.
6.
7.
8.
9.
10.
11.
Spindle (14)
Backing plate
(1) and
spindle (14)
Upper support
(21), backing
plate (1), and
spindle (14)
Two outside
holes, lower
support (15),
backing plate (1),
and spindle (14)
Lower support
(15)
Cable ramp (18),
lower support
(15), backing
plate (1), and
spindle (14)
Backing plate (1)
Backing plate (1)
Four shorter
screws (19),
Iockwashers
(9), and nuts (8)
Four screws (20),
Iockwashers (6),
and nuts (7)
Two screws (16),
Iockwashers (13),
and nuts (12)
Put in place so matchmarks line up.
Screw in and tighten using ~e in. socket, ratchet
handle with
~ in. drive, and ~e in. box-end wrench.
Screw in and tighten using X6 in. socket, ratchet
handle with ~ in. drive, and XG in. box-end wrench.
Torque to 30-35 Ib.-ft. (41-47 NŽm) using torque
wrench.
Screw in and tighten using XG in. socket, ratchet
handle with
~ in. drive, and XG in. box-end wrench,
Torque to 30-35 Ib.-ft. (41-47 N•m) using torque
wrench.
Cable ramp (18)
Put in place.
Two screws (17),
Screw in and tighten using XG in. socket, ratchet
Iockwashers (11),
handle with
~ in. drive, and X6 in. box-end wrench.
and nuts (10)
Bracket (3), two
a. Place handbrake cable (22) through hole in
Iockwashers (4),
backing plate (1).
and nuts (5)
b. Place bracket (3) in position.
c. Screw in and tighten nuts (5) and Iockwashers (4)
using ~6 in. socket and ratchet handle with
jj in.
drive.
FOLLOW-ON MAINTENANCE:
l Install wheel cylinders (para 4-36).
TASK ENDS HERE
4-65
Back to Top
