TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 127 of 320
TM 9-2330-247-14&P
4-36. WHEEL CYLINDERS (Con’t)
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Tee fitting
(11) and middle
fitting (14)
Middle fitting (14)
Tee fitting
(11) and
top fitting (7)
Tube (9), tee
fitting (11), and
top fitting (7)
Top wheel
cylinder (20)
Top fitting (7)
and top wheel
cylinder (20)
Backing plate (2)
Backing plate (2),
shield (1),
and top wheel
cylinder (20)
Top fitting (7)
and top wheel
cylinder (20)
Backing plate (2),
shield (1), and top
wheel cylinder (20)
Gasket (13),
gasket (15), and
fluid passage
bolt (16)
Nut (18) and
gasket (17)
Tube (9)
Two nuts (19)
Bleeder screw
(10)
Gasket (6),
gasket (8), and
fluid passage
bolt (5)
Shield (1) and
top wheel
cylinder (20)
Two screws (4)
and Iockwashers
(3)
Fluid passage
bolt (5)
Two screws (4)
and Iockwashers
(3)
a. Put gasket (15) on fluid passage bolt (16).
b. Put middle fitting (14), gasket (13), and tee fitting
(11) in place.
c. Screw in and tighten fluid passage bolt (16)
using 1X6 in. box-end wrench.
Screw in and tighten using
~ in. open-end box
wrench and adjustable wrench.
Put in place.
a. Screw in and tighten using X6 in. open-end
box wrench and adjustable wrench.
b. Repeat steps 11 and 12a for tube (12).
Screw in and tighten using ZG in. box-end wrench.
a. Put gasket (6) on fluid passage bolt (5).
b. Put gasket (8) and top fitting (7) in place.
Put in place.
Screw in part way.
Screw in and tighten using 1XG in. box-end wrench.
a. Tighten using ~ in. box-end wrench.
b. Repeat steps 13 through 18a for lower wheel
cylinder.
FOLLOW-ON MAINTENANCE:
. Install brakeshoes (para 4-32).
. Bleed brake system (para 4-34).
TASK ENDS HERE
4-73
Back to Top
