TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 88 of 320
TM 9-2330-247-14&P
4-26. CHASSIS WIRING HARNESS (Con’t)
ACTION
LOCATION
ITE M
REMARKS
NOTE
Some mounting hardware holds both brake line and chassis
wiring harness. On left side of frame, brake and wiring
harness clamps have to lineup before mounting hardware is
put on.
35.
Eight harness
Eight screws (1),
a. Aline clamp and frame screw holes.
clamps (2)
nuts (5), and
b. Put screws through frame screw holes and
and frame (7)
Iockwashers (4)
clamps.
c. Put Iockwashers and nuts on screws.
d. Tighten using no. 2 cross-tip screwdriver and
Z6 in. open-end wrench.
36.
Five frame holes (8)
Five grommets (6)
Put on chassis wiring harness (3) and push into
and chassis wiring
place.
harness (3)
FOLLOW-ON MAINTENANCE:
. Check operation of lights (para 2-10).
TASK ENDS HERE
TA701062
4-34
Back to Top
