TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 81 of 320
TM 9-2330-247-14&P
4-26. CHASSIS WIRING HARNESS (Con’t)
ACTION
LOCATION
ITEM
REMARKS
6.
7.
Two clips (21)
and two rear
comer clips (12)
8.
Frame (7)
MALE CONNECTOR REPAIR
9.
10.
11.
12.
13.
Two clips (12
or 21)
Wire lead (22)
Five grommets (6)
Using long round-nose pliers, pull out.
Eight screws (11 ),
Using no. 2 cross-tip screwdriver and
~. in. open-
nuts (9), and
end wrench, unscrew and take off.
Iockwashers (10)
Three prong and four prong clips are
removed the same way.
Two clips (21)
Take off.
and two rear
corner clips (12)
NOTE
If chassis wiring harness was removed from frame, skip step
9.
Connectors (14 and
Pull out and take apart.
15) or (18 and 19)
Take off.
Slide up until clear of contact (25) and retaining
washer (24).
Retaining
Take off.
washer (24)
Shell (23)
Slide off and get rid of.
NOTE
If replacing shell only, skip steps 13, 14a, and 14c.
Contact (25)
Using cutting pliers, cut off.
Be sure enough wire lead (22) remains to
make connection after repair. Discard
contact.
4-27
Back to Top
