TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 75 of 320
TM 9-2330-247-14&P
4-24.
SERVICE STOPLIGHT-TAILLIGHT ASSEMBLY (Con’t)
ACTION
LOCATION
ITEM
REMARKS
LAMP, LENS, AND DOOR ASSEMBLY REPLACEMENT
4.
5.
6.
7.
8.
9.
10.
Stoplight-taillight
body (6)
Door and lens
assembly (10)
Stoplight-taillight
body (6)
Door and lens
assembly (10)
Stoplight-taillight
body (6)
INSTALLATION
11.
Frame (4)
12.
Frame (4) and
service stoplight-
taillight assembly (5)
13.
Chassis wiring
harness leads (1) and
service stoplight-
taillight assembly (5)
Six captive
screws (11)
Preformed
packing (9)
Three lamps (8)
Three lamps (8)
Preformed
packing (9)
Door and lens
assembly (10)
Six captive
screws (11)
Service stoplight-
taillight assembly (5)
Two screws (12)
and
Iockwashers (13)
Six connectors (2)
Using 1/4 in. flat-tip screwdriver, unscrew from stop-
light-taillight body (6).
Door and lens assembly (10) will come off
with captive screws (11).
Using 1/4 in. flat-tip screwdriver, pry out of groove,
only if damaged.
Push in, turn 1/4 turn counterclockwise, and take out.
Place in proper socket (7), push in, and turn 1/4 turn
clockwise.
Place in groove.
Place in position.
Using 1/4 in. flat-tip screwdriver, screw in.
If repairing lamp, lens, or door assembly
only, go to FOLLOW-ON MAINTENANCE.
Place into position and aline with screw holes.
Install and tighten using 9/16 in. socket and ratchet
handle with 3/8 in. drive.
a. Push together.
b. Put connectors (2) in harness clip (3).
FOLLOW-ON MAINTENANCE:
l Check operation of light (para 2-10).
TASK ENDS HERE
4-21
Back to Top
