TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 80 of 320
TM 9-2330-247-14&P
4-26.
CHASSIS WIRING HARNESS (Con’t)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
2.
3.
4.
5.
Eight harness
clamps (2)
Chassis wiring
harness (3)
Two clips (21)
Two rear corner
clips (12)
Frame (7)
Eight screws (1),
nuts (5), and
Iockwashers (4)
Eight harness
clamps (2)
12 connectors
(18 and 19)
16 connectors
(14 and 15)
Chassis wiring
harness (3)
Using no. 2 cross-tip screwdriver and fi~ in. open-
end wrench, unscrew and take off.
Using ~ in. flat-tip screwdriver, spread and pull off.
Pull out and take apart.
Pull out and take apart
On older models, service stoplight-
taillight will have three connectors. Black-
out stoplight connector on the right side
will go directly into light body.
Using cutting pliers, cut where necessary and pull
out.
4-26
Back to Top
