TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 79 of 320
TM 9-2330-247-14&P
4-26.
CHASSIS WIRING HARNESS
This Task Covers.
a.
Removal
d. Circuit Marker Band Replacement
b. Male Connector Repair
e.
Installation
c.
Female Connector Repair
Initial Setup:
Equipment Conditions:
Materials/Parts:
l Intervehicular cable disconnected from towing ve-
l Insulating compound (Item 5, Appendix E)
hicle (para 2-12).
Tools/Test Equipment:
l Etcher, electric
l Pliers, diagonal-cutting
l Pliers, round-nose, long
l Screwdriver, cross-tip, no. 2
l Screwdriver, flat-tip, ~ in.
l Stripper, wire, hand
l Tool, crimping
. Wrench, open-end, 7~6 in.
ACTION
LOCATION
ITEM
REMARKS
NOTE
Chassis wiring harness does not have to be removed to replace or repair connectors
and circuit marker bands. If replacing male connectors only, go to step 9. If replacing
female connectors only, go to step 18. If replacing circuit marker bands only, go to step
26.
4-25
Back to Top
