TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 72 of 320
TM 9-2330-247-14&P
4-23. COMPOSITE LIGHT ASSEMBLY (Con’t)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Harness clip (3)
Eight connectors (2)
Pull out and take apart.
2.
Frame (4) and
Two screws (13)
Using 9/16 in. socket and ratchet handle with 3/8 in.
composite
and Iockwashers
drive, unscrew and take out.
light assembly (11 )
(12)
3.
Frame (4)
Composite light
Take off.
assembly (11)
ROTATED 180°
LAMP, LENS, AND DOOR ASSEMBLY REPLACEMENT
4.
Light body (9)
Six captive screws (6)
Using 1/4 in. flat-tip screwdriver, unscrew from light
body (9).
Door and lens assembly (5) will come off
with captive screws (6).
5.
Door and lens
Preformed
Using 1/4 in. flat-tip screwdriver, pry out of groove,
assembly (5)
packing (7)
only if damaged.
6.
Light body (9)
Four lamps (8)
Push in, turn 1/4 turn counterclockwise, and take out.
NOTE
Top lamp in composite light assembly is taillight, second
lamp is stop-turn lamp, third lamp is blackout taillight, and
bottom lamp is blackout stoplight.
7.
8.
Door and lens
assembly (5)
Four lamps (8)
Place in proper socket (10), push in, and turn 1/4 turn
clockwise.
Preformed
Place in groove.
packing (7)
TA701049
4-18
Back to Top
