TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 73 of 320
TM 9-2330-247-14&P
4-23. COMPOSITE LIGHT ASSEMBLY (Con’t)
ACTION
LOCATION
ITEM
REMARKS
9.
Light body (9)
10
INSTALLATION
11.
Frame (4)
12.
Frame (4) and
composite light
assembly (11)
13.
Chassis wiring
harness leads
(1) and composite
light assembly (11)
TASK
4-24.
Door and lens
Place in position on light body (9)
assembly (5)
Six captive
Screw in using 1/4 in. flat-tip screwdriver.
screws (6)
If repairing lamp, lens, or door assembly
only, go to FOLLOW-ON MAINTENANCE.
Composite light
Place into position and aline with screw holes.
assembly (11)
Two screws (13) and
Screw in and tighten using 9/16 in. socket and
Iockwashers (12)
ratchet handle with 3/8 in. drive
Eight connectors
a. Push together.
(2)
b. Put connectors (2) in harness clip (3).
FOLLOW-ON MAINTENANCE:
. Check operation of light (para 2-10)
ENDS HERE
SERVICE STOPLIGHT-TAILLIGHT ASSEMBLY
This Task Covers:
a.
Removal
c.
Installation
b. Lamp, Lens, and Door Assembly Replacement
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
l Intervehicular cable disconnected from towing ve-
l Handle, ratchet, 3/8 in. drive
hicle (para 2-12).
l Screwdriver, flat-tip, 1/4 in.
l Socket, 3/8 in. drive, 9/16 in.
4-19
Back to Top
