TM-9-2330-326-14-P

SEMITRAILER, TACTICAL, DROP DECK BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, M871A3

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

FEBRUARY 2006

TM-9-2330-326-14-P - Page 147 of 540

TM 9-2330-326-14&P

6-71

6-25. BULKHEAD AND STOWAGE RACK ASSEMBLY REPLACEMENT.

This Task Covers:

a. Removal

b. Installation

c. Follow-On Tasks

Initial Setup:

Tools and Special Tools:

Tool kit, general mechanic’s (Item 4, Appendix B-3)

Equipment Conditions:

Landing legs down

Semitrailer disconnected from prime mover

Sideboards/stakes removed from bulkhead and stowage racks

Tires chocked

Ground boards emplaced

General Procedure:

a. Removal.

WARNING

Bulkhead assembly weights 250 pounds.

CAUTION

Retaining strap must be wrapped around stowage

rack and panels then tightened/secured. Do not

attach strap ends to deck cargo rings. This will

cause the strap to prematurely wear and break,

resulting in loss of panels during operation.

1.

Remove two locknuts (11), two bolts (1), four locknuts (10), four washers (9), four bolts (8), and

curbside and roadside stowage assemblies (7). Discard locknuts.

2.

Remove eight nuts (6), eight lockwashers (5), eight bolts (4) and crossmember bulkhead assembly

(3). Discard lockwashers.

3.

Remove four nuts (12), four lockwashers (13), four bolts (14), and bulkhead assembly (2). Discard

lockwashers.