TM 9-2330-326-14&P
3-5
Table 3-1. Operator/Crew PMCS (Cont.).
ITEM
NO.
INTERVAL
ITEM TO
CHECK/SERVICE
PROCEDURE
EQUIPMENT NOT
READY/AVAILABLE IF:
7
Before
Lights
NOTE
•
Check for lose plug-in connectors.
Make
sure
there
is
no
debris
between plug and connector and
then
make
sure
that
plug-in
is
seated.
•
Mission
requirements,
urgency,
safety, and common sense should be
considered
in
determining
NMC
status of the semitrailer.
Connect intervehicular cable from tractor to
semitrailer. Check lights for damage, proper
operation, presence, and missing hardware.
Notify Unit maintenance if there are problems in
operation or damage is present.
Lights are damaged, do not
operate, or missing
hardware. NMC if required
for mission.
8
Before
Reflectors
Look for presence, damage, and missing
hardware.
Reflectors are missing and
required for mission.
NOTE
•
Tractor
must
be
coupled
before
checking ABS warning light.
•
ABS warning light should not stay
on when semitrailer is moving
above 4 mph (6.4 km/h).
•
If mission requirements do not allow for
troubleshooting of ABS system, continue
on
with
mission
until
system
can
be
properly diagnosed by Unit maintenance.
Only
modulation
will
be
affected
not
stopping capacity of brake system.
9
Before
ABS Warning Light
Visually check that ABS warning light does not
stay on. Notify Unit maintenance.
ABS light does not come
on or stays on.