TM-9-2330-326-14-P
SEMITRAILER, TACTICAL, DROP DECK BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, M871A3
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
FEBRUARY 2006
TM-9-2330-326-14-P - Page 83 of 540
TM 9-2330-326-14&P
6-7
6-2. BLACKOUT LIGHTS REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Tasks
Initial Setup:
Tools and Special Tools:
Materials:
Tool kit, general mechanic’s (Item 4, Appendix B-3)
Dielectric grease (Item 34, Appendix F)
Equipment Conditions:
References:
Landing legs down
Appendix H-16
Semitrailer disconnected from prime mover
Electrical Schematic, Section 6, Page 6-6
Tires chocked
Ground boards emplaced
WARNING
Disconnect all electrical power before performing any maintenance
on the electrical system. Failure to do so could result in injury to
personnel.
NOTE
•
Right and left blackout lights are removed and installed the
same way. This procedure covers one blackout light.
•
For detailed procedures and/or information, see referenced “H”
Section.
General Procedure:
a. Removal.
1.
Disconnect two connectors.
2.
Remove two nuts (3), two lockwashers (2), and blackout light (1). Discard lockwashers.
Back to Top
