TM 9-2330-330-14&P
0016 00-1/2 blank
LANDING GEAR TROUBLESHOOTING
0016 00
THIS WP COVERS:
Landing Gear Troubleshooting
INITIAL SETUP:
Maintenance Level
Operator/Crew
To troubleshoot the M969A3 landing gear, perform the test/inspections and corrective actions provided in
Table 1.
Table 1. Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
HANDCRANK IS DIFFICULT TO
OPERATE
1.
Check to see if lower legs
are bent.
If lower legs are bent, notify
Organizational maintenance. If
legs are not bent, go to step 2.
2.
Turn handcrank and raise
lower legs.
If lower legs return to the fully
retracted position, notify
Organizational maintenance that
further troubleshooting is
required. If legs do not retract,
notify Organizational
maintenance.
END OF TASK