TM 9-2330-334-13&P-1
FRONT MARKER LIGHTS DO NOT ILLUMINATE-Continued
0014 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Front Marker Lights Do Not Illuminate.
Change 1
0014 00-2
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
1.
Is 18-30 VDC present at
intervehicular cable pin E?
No.
Replace intervehicular cable
(WP 0062 00).
1.
Set multimeter to VDC.
Yes.
Go to (Indication/Condition
2).
2.
Disconnect intervehicular
cable connector from
voltage converter box.
3.
Position main light switch to
SER DRIVE on towing
vehicle.
4.
Connect positive (+) probe
of multimeter to
intervehicular cable pin E.
5.
Connect negative (-) probe
of multimeter to a known
good ground and note
reading on multimeter.