TM 9-2330-334-13&P
RIGHT FRONT MARKER LIGHT DOES NOT ILLUMINATE-Continued
0015 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Right Front Marker Light Does Not Illuminate.
Change 1
0015 00-2
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
1.
Is 8-16 VDC present at
connector J250?
No.
Repair wire 107B (EM
0195) or replace main
electrical harness (WP 0066
00).
1.
Set multimeter to VDC.
Yes.
Replace right front marker
light (WP 0061 00).
2.
Disconnect connector J250
from right front marker light
connector P250.
3.
Position main light switch to
SER DRIVE on towing
vehicle.
4.
Connect positive (+) probe
of multimeter to connector
J250.
5.
Connect negative (-) probe
of multimeter to a known
good ground and note
reading on multimeter.
END OF WORK PACKAGE